| geek_sandra7163 | August 27, 2008, 9:58 pm | #1 |
| OK Im all googled out and need help I am looking to download a driver for a speedtouch 510 modem so that we can run two pcs..any help please |
|
|
| geek_flewy | August 27, 2008, 10:02 pm | #2 |
| What version is it Modem-Router or switch, all i could see was it was a 1 port ethernet connection. No way to run more than one pc. |
| geek_flewy | August 27, 2008, 10:03 pm | #3 |
| Ok found a 4 port 510 shouldnt need drivers as they are not needed at all. |
| geek_sandra7163 | August 27, 2008, 10:07 pm | #4 |
| Well when I plug it all in nothing comes up. I have been connecting through ethernet on a little dlink one |
| geek_flewy | August 27, 2008, 10:13 pm | #5 |
| Nothing will come up, apart from showing that your connected by the two little monitors in the bottom right, Have you connected it and then gone to its default address? |
| geek_sandra7163 | August 27, 2008, 10:16 pm | #6 |
| Yes then i have run the check for connection and it says no cable |
| geek_flewy | August 27, 2008, 10:19 pm | #7 |
| What says that? |
| geek_sandra7163 | August 27, 2008, 10:30 pm | #8 |
| When I click on the diagnose connection problems, it says a cable is unplugged |
| geek_jmpcwiz | August 27, 2008, 10:30 pm | #9 |
| Have you ran the 'network wizard'?? Is the IP for the connection set to detect automatically? speed modem 510is that one of the telecom ones? Possibly you may need to run something from a CD. I had to set one up a few years back, and it was a hassle (The telecom router). Other routers just plug n play. |
| geek_sandra7163 | August 27, 2008, 10:32 pm | #10 |
| It must of previously come with a cd when they got it im guessing, its not showing up that anything has been connected to the computer |
| geek_drcspy | August 27, 2008, 10:34 pm | #11 |
| Just what type of cable are you using ? some routers will NOT connect thru a 'crossover' cable but will be very happy if you try to connect using a 'patch' (ordinary) network cable ......if you use a crossover on a machine that doent like it you'll get the 'cable unplugged' message |
| geek_sandra7163 | August 27, 2008, 10:36 pm | #12 |
| I keep getting redirected to here http://www.thomson.net/GlobalEnglish/Products/dsl-modems-gateways/Pages/default.aspx |
| geek_sandra7163 | August 27, 2008, 10:47 pm | #13 |
| Ok have just tried 3 working ethernet cables that all work on my dlink |
| geek_flewy | August 27, 2008, 10:49 pm | #14 |
| Have you been able to enetr the default address? |
| geek_1clickaway | August 27, 2008, 10:51 pm | #15 |
| Try Reseting it [http://www.speedtouch.net.nz/500HardwareReset.htm] :D |
| geek_1clickaway | August 27, 2008, 10:54 pm | #16 |
| See If This Helps http://tinyurl.com/5748mw :) |
| geek_jmpcwiz | August 27, 2008, 10:54 pm | #17 |
| You can download the CD disc here http://www.speedtouch.net.nz/NZConfigFiles.htm its a CD ISO, so just mount or burn 'image' with your favourite burning software. |
| geek_sandra7163 | August 28, 2008, 7:55 am | #18 |
| Ok I fell asleep last night will try these after work today,,gotta go |
| geek_pcgeek | August 28, 2008, 9:11 am | #19 |
| when you get redirected, does it go to that page, or does it display a blank page with writing in it going on about your internet connection? |
| Leave your comment: |
|
